Dell Dock Puts a Little Mac OS X Into Vista Studio Laptops

Dell’s Studio Laptops will be getting a little touch of the Mac OS when they ship, thanks to the Dell Dock, a launcher that cleans up the Vista desktop in the most charming, albeit derivative, way. Below you can see “Before” and “After” images of the cleanup: Read the rest of this entry

Popularity: 10% [?]

Microsoft compatibility problems, iPhone charging, Mail bouncing, syncing, and more

In this riveting episode of Ask TUAW we’re catching up a bit on the backlog, so we’ll be looking at a couple of problems generated by Microsoft products (Hotmail and Photo Story), charging an iPhone from a sleeping Mac, syncing personal data between two user accounts, using a Mac mini as a backup server, and more.

As always your suggestions are most welcome, and questions for next week should be left in the comments. When asking a question please include which machine you’re running and which version of OS X, as certain answers will vary between different Macs and Tiger vs. Leopard, etc. (we’ll assume you’re running Leopard if you don’t specify). And now, on to the questions!

Andrew asks

I’m running the current version of Leopard on a PowerBook G4 (1.5GHz with 1.25GB memory). I was wondering if there is a way to shut the lid on my laptop while still keeping power to the USB ports. I would like to be able to put my computer to sleep and keep it charging my iPhone..

Unfortunately, no; this is a hardware issue. In fact, Apple recently added this feature to the iMac line. However, according to this thread and this hint the FireWire port is still powered while the computer is asleep. While you can’t sync your iPhone over FireWire, you can possibly use that to charge it with a FireWire to Dock connector cable and if indeed if you use this double headed cable ($19) you don’t even have to switch (i.e. plug in both at the same time).

pjones asks

When using iChat, I love that the icon bounces in the dock when I receive a new message. Is there a way to assign this same icon “bounce” behavior to the Mail.app dock icon, so that it bounces when I get new mail?

As another reader pointed out this is easily accomplished with a Mail.app rule. Just configure a rule in the Mail.app preferences as follows:

Kyle asks

I have recently switched to a mac mini 1.83Ghz running leopard and now use a .mac e-mail address. Previously I used a windows live hotmail account as my primary e-mail and I am wondering if there is any way to have e-mails to the hotmail account delivered to the “mail” application on my mac?

I have a very short-term solution for you: the Mac OS X HTTP Mail Plugin will allow you to download Hotmail into Mail.app. However, the developer has a note saying that “Microsoft is closing us down” as of June 30, 2008 because they’re replacing WebDAV access with a new proprietary (and undocumented) technology called “DeltaSync.” Now if you’re willing to pay you can get POP3 access with a Hotmail Plus account. Finally, there’s also a third-party service called IzyMail that will supposedly allow you to access Hotmail with an IMAP mail client, however I have never used it and cannot comment on its reliability.

My wife had this problem when switching and I finally just switched her over to Gmail. If I were you, I would go ahead and just pull the band aid off switch away from Hotmail. Microsoft’s mail service is just not competitive anymore and it’s a bear to deal with as you’re finding out.

Adam asks

Some time ago, in the not so distant past, I noticed that the .Mac sync icon started to appear on the top menu bar for me. I have a MBP running Leopard. I have never synced anything with .Mac, yet so much as subscribed so I have no clue how this appeared. Now I want to know how to make it disappear, the .Mac button in Settings does not help me out as far as I can tell.

The sync item will also run for the iPhone so that may be how it got there. Anyway you can remove in either of two ways. Just hold down the ⌘ key and drag it off the menubar. Or you’ll find the checkbox setting in the Sync tab of the .Mac Preference Pane.

joeyjoe serially asks

I use my MacBook at work and home, so I created two accounts on it. I did this primarily because I need easy access to different applications at work and at home and because I didn’t want anyone to accidently stumble onto my personal files at work. This setup, however, has not really worked because I would still like to keep my email, contact, calendar and applications in sync between the work and home accounts. The simple solution I suppose would be to use one account and set up two different docks and desktops, but this isn’t even possible with Spaces. What do you suggest?

You could try using one account and keeping all of your personal files in an encrypted FileVault created with Disk Utility. Alternately, you could continue using separate accounts and adopt some kind of syncing solution. The obvious one is .Mac, however, you might also consider using something like IMAP for email and something like Google for calendar and contact information. You can even sync Google’s services with iCal using BusySync ($25) or Spanning Sync ($25/year). Address Book syncing is now possible with Syncman ($15) though apparently Address Book syncing is coming to the others as well. Having lots of this kind of data online as other advantages as well, so that might be worth looking into.
I created a Windows Media File using Microsoft’s excellent slideshow program, Photo Story, however I cannot view it on my Mac. The WMV file that Photo Story creates cannot be played in anything before Windows Media Player 10, and as far as I can tell, the latest version of Flip for Mac only covers files created for Windows Media Player 7.0 and earlier. I can’t find anything to play this thing!

I found this site with some suggestions. Basically, it is a codec problem and so the suggested solutions are converting the file to a QuickTime MOV with the file conversion site Zamzar or (if you have access to Windows) convert the file to a Flip4Mac compatible version with the Windows Media Encoder.
computergeeksjw asks

I have a Rage 128 video card that came with my old iMac. I’ve looked and looked, but I can’t seem to find a driver anywhere. ATI’s website only has drivers for Windows. I wanted to set up Extended Desktops but my Mac won’t recognize it. Apple Technical Support @ 1-800-My-Apple said to get a driver, but I can’t find one:). Any solutions/suggestions?

Unfortunately, I do not think Extended Desktop is possible with the Rage 128. The hack to enable this on older machines is called Screen Spanning Doctor but the Rage 128 is explicitly not supported.

Jason asks

…. My utopian goals for the backup system are 1) to have an automatic system that takes the responsibility out of it as much as possible, 2) have an offsite - preferably, online - backup of my photos and music (because those are virtually irreplaceable - especially the photos), and 3) if possible, have online access to all my personal files for when I travel (a lot)…. Is it possible to use the Mini as a backup & Time Machine server (with a huge HDD attached via USB) without having to buy Leopard Server ($500) to expose the external disk?

Yes. Backup to an AFP-shared HFS+ disk mounted on any Leopard computer (Client or Server) is officially supported by Time Machine. What I would do is buy a large external FireWire drive and hook it to the Mac mini. Then, share that drive with AFP and use it with Time Machine and/or SuperDuper!.

Finally as far as accessing file from the road goes there are a number of ways to accomplish this from Back to My Mac and iChat Screen Sharing, to others like iGet ($49). You might also want to check out a little application we posted on before called FarFinder ($35).

Sam asks

If I have a 1st gen iPhone and want to get a 3G one, could I just buy a 3G phone and put my 1st gen sim card in?

You’ll probably have to unlock the new phone to get this to work. It’s obviously not known yet whether the unlocking tools with work on the 3G iPhone.

Joel asks

I am thinking of an application, but I can’t remember it’s name, and I can’t find it via searching for the life of me! It was talked about on TUAW, and what it does is, it allows you to make a bookmark of a website, and it treats the bookmark like an application that you can open separately, and keep on your dock and stuff.

I’m not 100% sure what application it is you’re referring to. I suppose you know that you can just drag a URL to the right side of your Dock (assuming it’s on the bottom) and add a spring icon to launch any website.

If what you want is a site-specific browser, you can check out Fluid or Prism — these custom builds of the Webkit and Firefox browser engines can create one-off apps that launch a specified website in a standalone window.

[Via TUAW]

Popularity: 50% [?]

AppleScript: download YouTube videos

Keeping with the “self-built apps,” I’m going to show you how to build your own YouTube downloader. Sure you could use applications like TubeSock, but where’s the fun in that? This application will download the YouTube flash video from a pasted link, and all with a little AppleScript.

Continue reading to learn how to build the YouTube downloader.Building the script
Just copy the following script into the Script Editor.app (/Applications/AppleScript/Script Editor.app):

set pageURL to display dialog “Enter the URL of the YouTube video’s page:” default answer “”set AppleScript’s text item delimiters to “?v=”
set v_id to item 2 of text items of text returned of pageURL
set pageURL to “http://www.youtube.com/v/” & v_id

Saving the script
Let’s save this AppleScript as an AppleScript application. To do this, just click File > Save. Type in a name for your appliction and choose “Application Bundle” from the “Format” drop-down box.

Running the script
To run the YouTube downloader, double-click on the AppleScript application that you just created. When the script starts, it will display a dialog asking you for a YouTube URL (this is the URL that you copy from the address bar, not from the YouTube embed). Paste the URL and click “OK.” The application will then start running and run a couple background processes — in about 1-2 minutes (depending on internet connection / Mac speed) your default browser will begin downloading a file named “get_video.flv.”

Once the download has finished, you can convert the flash video into something that you can look at natively. I recommend a free application called iSquint — you can drop the flash video onto the iSquint app and convert it into numerous formats including iPod and Apple TV.

Additional notes

1. This script was designed to work on Mac OS X Tiger / Leopard.
2. While this script was designed and tested to work with Safari 3.0 and Firefox, it can be used with other browsers; however, if you are experiencing difficulties with your default browser, try Safari or Firefox

Popularity: 13% [?]

Moody 1.0 is available

Last year, we wrote about the Moody beta. This week, the folks at Crayon Room made version 1.0 available. The idea is to sort music by mood, rather than artist, album or genre.

The first step is to tag your music as sad or happy; calm or intense (fortunately, you can tag many tracks at once). As you do, the Moody track information is stored in the “Composer” field.

Once that’s done, you can keep the tiny Moody window open and click the color-coded button that represents your current mood. Other goodies include Twitter integration, support for uploading and downloading tags and the color editor for customizing those buttons.

It’s a great idea; I often listen to music by “mood.” Moody is donation ware ($9US is suggested) and requires Mac OS 10.4 or better.

Popularity: 11% [?]

Rock your clipboard with CopyPaste Pro

Described as “Time Machine for the clipboard,” CopyPastePro takes your Mac’s clipboard way beyond simple temporary storage.

There’s a multiple clipboard option of course, but CopyPaste Pro also lets you edit the contents of a given clipboard (or “clips” as they call them) with its built-in word processor, create an archive of previous clips and even review clips via a “clip browser,” which resembles Mac OS X’s application switcher.

If you’re one of those users who just can’t live with the standard Mac OS clipboard, check out CopyPaste Pro.

CopyPaste Pro requires Mac OS X version 10.4.x or 10.5.x. For a short time, users of CopyPaste can upgrade to CopyPaste Pro for $20US. On May 12th, the price will go up to $30US.

Popularity: 8% [?]